最优化算法与纯元素谱剥离相结合的能量色散X射线荧光谱解谱方法

在进行能量色散X射线荧光光谱(EDXRF)解谱时,如果给定样品的元素构成,采用纯元素谱图剥离的方式会更加合理,但由于每个元素的谱线都不止一条,如果仅仅针对主线对齐做剥离,会导致结果的严重失真,同时剥离次序对解谱结果有较大影响。介绍了一种最优化算法与纯元素谱剥离相结合的EDXRF解谱方法,该方法以多个纯元素谱的强度大小和峰位漂移道数作为变量构建残差方程,并用最优化计算的方法去调整,直至残差达到极小。实验采用强度顺序剥离、能量顺序剥离和最优化算法拟合3种方法分别对谱线重叠较为严重的La-Ce-Pr-Nd混合液样品的L系谱线进行了解析,结果表明最优化计算方法拟合的谱图与原始谱的残差 (1415.0)比另两种方法(166094.0和3192.7)大幅度缩小,拟合谱与原始谱更为吻合,并且方法在实现时对初值不敏感,解谱精度也不依赖于剥离次序。     

上海市火力发电行业能源计量现状分析

能源计量与节能监测、能源审计、能源统计、能源利用状况分析是用能单位能源管理和节能工作的基础。通过对本市部分火力发电企业的现场调研，针对性地提出改进建议，以期帮助用能单位增强能源计量在节能减排工作中的有效性。     

A review on coupling Green sources to Green storage (G2G): Case study on solar-hydrogen coupling

The present review paper aims to shed lights on the concept of fully green energy system which includes both the source of energy and the storage system. The objective is to propose an energy label “Green to Green” (G2G) that identifies systems involving simultaneously green source and green storage, as an efficient solution to achieve a significant reduction in the dangerous level of pollution that most countries have reached today. Green sources include mainly renewable energy systems such as solar, wind, geothermal and wave energy systems. In its turns green storage includes pumped hydroelectric, flywheel, hydrogen and compressed air. Moreover, and as a case investigation on G2G concept, the paper reviews the main solar-hydrogen coupling systems, that are categorized within four categories parabolic trough-hydrogen, solar tower-hydrogen, photovoltaic-hydrogen and solar chimney-hydrogen.     

Environmental and energy life cycle analyses of passenger vehicle systems using fossil fuel-derived hydrogen

Hydrogen energy utilization is expected due to its environmental and energy efficiencies. However, many issues remain to be solved in the social implementation of hydrogen energy through water electrolysis. This analyzes and compares the energy consumption and GHG emissions of fossil fuel-derived hydrogen and gasoline energy systems over their entire life cycle. The results demonstrate that for similar vehicle weights, the hydrogen energy system consumes 1.8 MJ/km less energy and emits 0.15 kg-CO 2 eq./km fewer GHG emissions than those of the gasoline energy system. Hydrogen derived from fossil fuels may contribute to future energy systems due to its stable energy supply and economic efficiency. Lowering the power source carbon content also improved the environmental and energy efficiencies of hydrogen energy derived from fossil fuels.     

Inductive effect in Mn-doped ZnO nanoribon arrays grown on Ni foam: A promising key for boosted capacitive and high specific energy supercapacitors

Transition metal oxides have been explored in supercapacitor applications owing to their safety, low cost, high specific capacitance and high electrochemical activity. Among all transition metal oxides, zinc oxide based materials show remarkable response for designing the supercapacitors with high electrochemical activity. Here in, Mn doped ZnO (Zn_1-xMn_xO₃ with x = 0, 0.25, 0.50, 0.75 and 1) was synthesized by a facile hydrothermal method. Doping of Mn into the ZnO increased the surface area and decease the charge transfer resistance for the Zn_0.5Mn_0.5O₃. All the synthesized materials were characterized by x-ray diffraction (XRD), scanning electron microscopy SEM), BET, electrochemical tests and other various analytical techniques to confirm the structural, morphological, textural and suprcapacitive properties. The synthesized material Zn_0.5Mn_0.5O₃ having the porous nanoribons structure with BET surface area (2490 cm²/g). The electrochemical studies showed significantly enhanced response toward pseudocapacitive nature. The synthesized material exhibited the excellent specific capacitance (515F/g), specific energy (28.61 Wh/kg) and specific power (1000 W/kg) at current density of 2 mA/g. Such impressive and superior properties make the MnZnO₃ material as promising candidate for new generation supercapacitor applications.     

WSN低功耗低时延路径式协同计算方法

针对云计算应用于无线传感器网络(Wireless Sensor Network,WSN)时延敏感型业务时存在的高传输时延问题,提出了一种WSN低功耗低时延路径式协同计算方法。该方法基于一种云雾网络架构开展研究,该架构利用汇聚节点组成雾计算层;在数据传输过程中基于雾计算层的计算能力分步骤完成任务计算,降低任务处理时延;由于汇聚节点计算能力较弱,时延降低将导致能耗增加,WSN工作寿命减短,为此提出能耗约束下的任务映射策略,并利用离散二进制粒子群优化(Binary Particle Swarm Optimization,BPSO)算法解决能耗约束下的时延优化问题。仿真结果表明,在相同的能耗约束下,对比其他算法,基于BPSO算法得出的映射方案能有效降低业务处理时延,满足时延敏感型业务的需求。     

Deconvoluting Energy Transport Mechanisms in Metal Halide Perovskites Using CsPbBr3 Nanowires as a Model System

Understanding energy transport in metal halide perovskites is essential to effectively guide further optimization of materials and device designs. However, difficulties to disentangle charge carrier diffusion, photon recycling, and photon transport have led to contradicting reports and uncertainty regarding which mechanism dominates. In this study, monocrystalline CsPbBr₃ nanowires serve as 1D model systems to help unravel the respective contribution of energy transport processes in metal-halide perovskites. Spatially, temporally, and spectrally resolved photoluminescence (PL) microscopy reveals characteristic signatures of each transport mechanism from which a robust model describing the PL signal accounting for carrier diffusion, photon propagation, and photon recycling is developed. For the investigated CsPbBr₃ nanowires, an ambipolar carrier mobility of μ = 35 cm² V⁻¹ s⁻¹ is determined, and is found that charge carrier diffusion dominates the energy transport process over photon recycling. Moreover, the general applicability of the developed model is demonstrated on different perovskite compounds by applying it to data provided in previous related reports, from which clarity is gained as to why conflicting reports exist. These findings, therefore, serve as a useful tool to assist future studies aimed at characterizing energy transport mechanisms in semiconductor nanowires using PL.     

Degradation pattern of contact resistance and characteristic trap energy in blue organic light-emitting diodes

Thin and lightweight organic light-emitting diodes (OLEDs) are promising candidates for next-generation rollable displays; they offer numerous advantages, such as scalable manufacturing, high color contrast ratio, flexibility, and wide viewing angle. Despite the numerous merits of OLEDs, the insufficient lifetime and stability of blue OLEDs remain unresolved, thereby necessitating a feedback strategy for lifetime extension. Herein, we propose a simple yet effective methodology to determine the contact resistance (R_CT) and characteristic trap energy (E_T) of OLEDs simultaneously in the trapped-charge-limited-conduction regime, where electroluminescence occurs primarily. To validate our approach, the extracted R_CT and E_T values are directly compared with each other by connecting a commercial resistor (R_C) to a blue OLED in series. The percent errors discovered in R_C and E_T are less than 7% and 4%, demonstrating the high feasibility and accuracy of our approach. We further employ this method to study the degradation mechanism of a blue OLED by presenting the electrical stress time- and cycle-dependent R_CT, E_T, ideality factor, and turn-on voltage, revealing different degradation patterns of the metal-to-transport layer interface and emission layer, respectively. Our results provide better insights into the electrical parameter extraction method and electrical current degradation mechanism in blue OLEDs.     

Ultrahigh and field-independent energy storage efficiency of (1-x)(Ba0.85Ca0.15)(Zr0.1Ti0.9)O3-xBi(Mg0.5Ti0.5)O3 ceramics

Relaxor ferroelectrics are attracting an increasing interest in the application of pulse power systems due to their excellent energy storage performance. In this paper, the (1-x)(Ba_0·85Ca_0.15)(Zr_0·1Ti_0.9)O₃-xBi(Mg_0·5Ti_0.5)O₃ ((1-x)BCZT-xBMT, x ≤ 0.2) relaxor ceramics are prepared by the solid state method. The influence of BMT on the microstructure, dielectric and energy storage properties of the prepared ceramics is investigated. The XRD results show that the peak intensity of impurities (Bi₂O₃, TiO₂ and Ba₂Bi₄Ti₅O₁₈) is gradually stronger than that of BCZT phase with x increasing. Meanwhile, the grain size of (1-x)BCZT-xBMT ceramics gradually increases on account of the appearance of impurities Bi₂O₃. Influenced by the impurities and BMT, the dielectric constant of prepared ceramics gradually decreases with x increasing. A large W_rec value of 0.65 J/cm³ with an ultrahigh η value of 97.89% is achieved at x = 0.15 due to the high breakdown strength and slim P-E hysteresis loop. Meanwhile, the η is insensitive to the electric field. The ultrahigh η leads to lesser energy loss during the charge and discharge process. It makes the 0.85BCZT-0.15BMT ceramic more attractive in the application of pulse power systems.